A first glimpse on policy packaging for implementation of BRT projects
Policy packaging (i.e. the combination of individual policies and measures in order to achieve a certain goal) is a common practice in urban mobility management used to create synergies between single policies or to mitigate negative effects of a given policy.
However this practice is filled with difficulties of different kinds, from conflicting measures in the same package to simply bad packaging design, disregarding synergetic effects that can be achieved with the simultaneous or synchronized adoption of more than one policy measure. This problem has long been identified and is especially intense in urban areas. However it has not yet been solved.
It is worth mentioning that there is a common perception by several authors that these difficulties are much related with the institutional design and legal framework which constitute an outset condition of the decision process. This perception will be only a departure hypothesis in our analysis, since the empirical work entailed in this research will be supported by a structured analysis of a large number of BRT implementation cases.
This work is part of a broader project about the complexity of policy design in urban mobility systems with the purpose of enhancing the adoption and implementation of BRT systems.
BRT and BHLS around the world: Explosive growth, large positive impacts and many issues outstanding
A survey of Bus Rapid Transit BRT and Bus of High Level of Service BHLS around the world indicates that there are about 120 cities with bus corridors, with 99 of the cities entering into the list in the last 12 years. The existing bus corridors comprise about 280 corridors, 4300 km, 6700 stations and use 30,000 buses, serving about 28 million passengers per day. In 2010–2011, 19 cities completed new systems − 16 in the developing world – and seven cities expanded their current systems. By late 2011, about 49 new cities were building systems, 16 cities were expanding their corridors, and 31 cities were in initial planning. This impressive growth may be attributed in part to the successes of Curitiba, Bogotá, México City, Istanbul, Ahmedabad and Guangzhou. These cities show low cost, rapid implementation and high performance BRTs, with significant positive externalities. Interesting trends are emerging, such as the implementation of citywide integrated bus systems, improved processes for private participation in operations, increased funding from national governments, and growth of bus manufacturers and technology providers. Despite the growth, there are some outstanding issues: BRT and BHLS do not have a single meaning and image and are often regarded as a “second best” as compared to rail alternatives. In addition several systems in the developing world suffer problems resulting from poor planning, implementation and operation, due to financial, institutional and regulatory constraints. The BRT and BHLS Industry are in their “infancy” and there is need for consolidation and concerted effort.
Methodology for calculating passenger capacity in bus rapid transit systems: Application to the TransMilenio system in Bogotá, Colombia
Transit textbooks and engineering manuals indicate that the capacity of Bus Rapid Transit –BRT – systems does not exceed 20,000 passengers per hour per direction. The implementation of the TransMilenio BRT System, in Bogotá, Colombia, showed that the systematic combination of multiple platforms at stations, overtaking lanes, level boarding, prepayment, large buses with multiple doors, express and local services, and traffic engineering measures at intersections, allow for very large passenger throughput. Measurements indicate actual throughput of 43,000 passengers per hour per direction with average bus occupancy of 150 passengers per articulated bus, and a commercial speed of 22–24 km/h. According to special formulas developed for the analysis of high capacity BRT corridors, the critical section of TransMilenio has a practical capacity of 48,000 passengers per hour per direction with its existing infrastructure and 150 passengers per bus – 35,000 passengers per hour per direction with 110 passengers per bus. Changes in existing infrastructure, such as additional platforms, higher capacity vehicles, non-grade facilities at critical intersections, among other improvements, may increase the capacity, speed, reliability and quality of service of the system.
TransMilenio BRT system in Bogota, high performance and positive impact – Main results of an ex-post evaluation
Walk the line: station context, corridor type and bus rapid transit walk access in Jinan, China
This paper examines BRT station walk access patterns in rapidly urbanizing China and the relationship between bus rapid transit (BRT) station context and corridor type and the distance people will walk to access the system (i.e., catchment area). We hypothesize that certain contextual built environment features and station and right-of-way configurations will increase the walk-access catchment area; that is, that urban design influences users’ willingness to walk to BRT. We base our analysis on 1233 user surveys, conducted at 19 BRT stations along three existing (as of summer 2009) BRT corridors in the city of Jinan. Ordinary least squares regression is applied to estimate the relationship between walk access distances and aggregate station- and corridor-area characteristics, controlling for individual- and trip-specific attributes. The results suggest that people walk farther to BRT stations when the walking environment has certain features (median transit-way station location, shaded corridors, busy and interesting). Trip and trip maker characteristics play a relatively minor role in defining BRT walk access distance. Implications include the need for flexible transit station catchment area definitions in identifying transit-oriented development opportunities and estimating system demand.
The value of a promise: housing price impacts of plans to build mass transit in Ecatepec, Mexico
This research explores whether announcement of plans to build mass transit infrastructure had an effect on housing prices in Ecatepec, a fully urbanized municipality in the northeastern fringe of the Mexico City metropolitan area. The analysis compares prices of properties located within one kilometer of the future bus rapid transit (BRT) corridor with those of properties sold within the same distance of a similar corridor where no mass transit was slated to run. Differences are estimated before and after the announcement. The results contradict the hypothesis that transit project plans trigger an immediate windfall for property owners who capitalize on the expected benefits of enhanced accessibility before the start of operations. Instead, the mass transit plan appears to have had no impact on prices of lower-quality properties and in fact reduce rather than increase the prices of higher-quality properties.
Download full article.
Passenger capacity in BRT systems: formula development and application to the TransMilenio System in Bogota, Colombia
Transit textbooks and engineering manuals indicate that the capacity of Bus Rapid Transit –BRT – systems does not exceed 20,000 passengers per hour per direction. The implementation of the TransMilenio BRT System, in Bogotá, Colombia, showed that the systematic combination of multiple platforms at stations, overtaking lanes, level boarding, prepayment, large buses with multiple doors, express and local services, and traffic engineering measures at intersections, allow for very large passenger throughput. Measurements indicate actual throughput of 43,000 passengers per hour per direction with an average bus occupancy of 150 passengers per articulated bus, and a commercial speed of 22-24 km/hour. According to special formulae developed for the analysis of high capacity BRT corridors, the critical section of TransMilenio has a practical capacity of 48,000 passengers per hour per direction with its existing infrastructure and 150 passengers per bus – 35,000 passengers per hour per direction with 110 passengers per bus. Changes in existing infrastructure, such as additional platforms, higher capacity vehicles, non-grade facilities at critical intersections, among other improvements, may increase the capacity, speed, reliability and quality of service of the system.
Designing an express service for a bus corridor in Santiago, Chile
In transit systems with high demand levels, the use of express bus services that serve only a subset of stops along certain routes would seem to be a promising alternative given the benefits they offer to both users and operators. For users, express buses mean improved service levels in the form of lower travel times due to fewer stops and higher between-stop speeds, while for system operators they enable demand to be met with fewer vehicles thanks to shorter bus cycles.
In this article we present a work aimed at designing an express service to operate over a given corridor in Santiago, Chile in conjunction to another one that would serve every bus stop on the corridor (i.e. an all stop service). To do so, we had access to origin destination trip matrices between bus stops during the morning peak, and the off peak periods. These matrices were used to construct diverse demand scenarios for the corridor based on our expectations of the change that the new express service would cause.
Based on the studied scenarios we propose two different express services, one for the peak hour and one for the rest of the day. Results suggest that implementing these services would reduce social costs when compared to a solution where the corridor is served by a single all stop line. Users that make long trips would be the most favoured from this decision. We also conclude that the longer the trips and the larger the demand, the higher the benefits obtained from operating an express service.
The dimensionality of performance frameworks and performance measurement for bus rapid transit systems
Fundamental to all good business practices in the delivery of public transport is knowledge of how well the enterprise is performing, especially relative to other enterprises undertaking similar activities, as well as self performance over time. A commitment to performance management and benchmarking should transcend all institutional settings, be they subject to competitive tendering or negotiated contracting, and in the presence or absence of specific incentives and sanctions. This paper focuses on the development of a framework within which performance metrics can be defined and introduced in the context of meeting strategic, tactical and operational objectives in the public transport sector. We discuss the important matters of definition of performance, data requirements, standards, the hierarchy of integrated partial and global measures of performance and frameworks to compare enterprises, and to explain why there are differences, and what actions might contribute to closing the gap between relatively poor and better overall performance. The relationship between inputs, outputs and outcomes is central to the performance rubric, as well as an understanding of the processes that underlie the mappings between these three dimensions. An important aim of the paper is to ensure that the data collection activity planned for a global study of the performance of Bus Rapid Transit (BRT) systems is guided by an integrated and comprehensive framework for performance management, measurement, feedback, and improvement.
Evaluation of the Delhi bus corridor: lessons learnt and recommendations for improvement
Bus rapid transit (BRT) has extensive applications in South and North America, Europe and the Far East, but it is a novel concept for South Asia. One of the initial projects in India, the Delhi Bus Corridor, has been controversial: media outlets highlighted problems for the general traffic and safety, while user surveys showed improved perception by bus users, bicyclists and pedestrians. The discussion of the benefits and problems of the corridor has been mostly based in perceptions and prejudices. The authors conducted an independent evaluation to contribute with technical arguments to this discussion and to provide suggestions for the corridor improvement. The results were also intended to contribute to the understanding of the BRT concept in the Indian context. The authors conclude that the Delhi bus corridor has improved people mobility along the initial stretch, but requires significant performance, safety and overall quality enhancements. The project only comprised major changes in infrastructure but lacked of integrated implementation of service plans, technologies and operations. User and community education was also insufficient. In addition to ongoing improvements, the authors identified the need to: i) establish a quality improvement program measuring the system performance, ii) focus on improving reliability and comfort; and iii) reevaluate the bus service plans to provide a better match of the supply and demand. The authors also recommend using median bus lanes with strong segregation as the preferred option for bus priority in Delhi. The bus corridor in Delhi provides invaluable experience for the enhancement of transit facilities and services in India and beyond.
The macrobus system of Guadalajara, Mexico: an evolved concept in BRT planning and implementation for medium capacity corridors
Bus Rapid Transit (BRT) is rapidly growing as an effective alternative for medium and high capacity corridors in developing countries. The Guadalajara BRT system represents an important reference for transit professionals considering low cost, rapid implementation, high impact transit alternatives. The initial 16 km line in Calzada Independencia, started operations on March 2009 and has received high ratings by the users. It includes 27 stations, 41 articulated buses and 103 feeder buses. The system operates at a high frequency with a relatively high commercial speed of 21 km/hr. It carries 127,000 passengers/day and 5,000 passengers per hour in the peak load section. Total capital investment was USD 61 million (USD 3.8 million/km). The BRT corridor positively compares with rail alternatives. The authors evaluated both the characteristics and the performance of the system as compared with high-end BRT paradigms. The corridor meets most of the high-end BRT components. Nevertheless, it did not start with all the elements in place. The corridor has also achieved important advances in performance. There is a need to continuously report performance indicators, mainly user perception, reliability, and comfort, so management actions for continuous improvement can be taken. The project was possible due to the strong political leadership; the support of a knowledgeable technical advisory team with international practical experience; adequate level of funding for planning and implementation; and a systematic approach that combines infrastructure, vehicles, operations and technology.
Bus rapid transit in Curitiba, Brazil: A look at the outcome after 35 years of bus-oriented development
Curitiba, the world’s cradle for bus rapid transit (BRT), is an affluent city in Brazil. Its integrated transit network (RIT) is one of the most successful bus transit systems in the Western Hemisphere. RIT is the result of 35 years of continuous upgrades to bus service, which ultimately led to the creation of the BRT concept and lent structure to Curitiba’s urban development. The recently inaugurated Green Line (Linha Verde) is the backbone of a renewed urban structural concept, with a linear park and the redevelopment of low-density, industrial properties. The line takes full advantage of evolved BRT concepts, such as cleaner vehicles and fuels and the introduction of passing lanes at stations to increase capacity and improve commercial speeds. The success of Curitiba derives from a mix of political leadership, innovation, pragmatism, technocracy, and continuity. This paper presents Curitiba’s main transit milestones over time, barriers to planning and implementation, and measures adopted to solve or mitigate them. A series of recommendations includes (a) improvements in the delivery of quality of service to transit users, (b) conduct of a homebased origin-destination survey to identify the mobility pattern within the metropolitan area, and (c) consideration of value capture mechanisms and public-private partnerships in transit projects.
The effect of OD trip dispersion versus concentration in express service design
In public transit systems with high demand levels, the use of express bus services that serve only a subset of stops along certain routes would seem to be a promising alternative given the benefits they offer to both users and operators. In actual practice, express services in systems such as Transmilenio (Bogota, Colombia), Transantiago (Santiago, Chile), and Metro Rapid (Los Angeles, CA) have proven to be highly appealing. This raises the question about when express services are a reasonable option. Previous work has focused on how some characteristics of the demand structure of a corridor affects the benefits that express services can yield, showing that the load profile shape and the average trip length are crucial. This work presents some evidence that also the dispersion of the demand among different OD pairs (keeping the load profile and the total number of trips constant) affects the potential benefits of express services. As expected the more concentrated the demand into few OD pairs, the more cost savings that can be obtained. To answer this question we developed a methodology to generate OD matrices that share all relevant attributes but differ in variability among OD flows. Thirteen matrices were generated and their optimal sets of bus services with their respective frequencies were obtained. Using the coefficient of variation as a measure of matrix variability, we confirmed that more demand variability (i.e. more flow concentration) gives room to more express services and lower social costs.
Design of limited-stop services for an urban bus corridor with capacity constraints
In high-demand bus networks, limited-stop services promise benefits for both users and operators, and have proven their attractiveness in systems such as Transmilenio (Bogota, Colombia) and Transantiago (Santiago, Chile). The design of these services involves defining their itinerary, frequency and vehicle size, yet despite the importance of these factors for the network’s efficiency, no published works appear to provide the tools for designing high-frequency unscheduled services on an urban bus corridor, minimizing social costs.
This paper presents an optimization approach that minimizes these costs in terms of wait time, in-vehicle travel time and operator cost. Various optimization models are formulated that can accommodate the operating characteristics of a bus corridor, given an origin–destination trip matrix and a set of services that are a priori attractive. The models then determine which of these services should be offered at what frequencies and with which type of vehicles. A case study in which the model is applied to a real-world case of a bus corridor in the city of Santiago, Chile, is presented and the results are analyzed. Finally, the model is used on two different demand scenarios establishing which type of services tend to be good candidates on each case and providing preliminary insights on the impact of some key parameters.
A importancia de simular sistemas Bus Rapid Transit
Cresce o interesse por sistemas BRT tanto nas cidades dos países em desenvolvimento como nas nações desenvolvidas. Mais de 70 sistemas já foram implantados no mundo e o Brasil pretende inaugurar 500 km para a Copa do Mundo de 2014 e Jogos Olímpicos de 2016. O desempenho desses sistemas varia muito em função da configuração de projeto, podendo transportar até 45.000 passageiros/h/sentido. As estações e as interseções são os principais gargalos a limitar o desempenho de um BRT e, nem todos os corredores de BRT implantados no mundo foram projetados de forma a propiciar o seu melhor rendimento, havendo sempre margem para introduzir melhorias. Logo, é importante dispor de ferramental que propicie antecipar os problemas gerados por uma determinada configuração de projeto. Esse artigo apresenta o EMBARQ BRT Simulator, um modelo microscópico de simulação especialmente desenvolvido para representar o desempenho de sistemas de BRT sob uma variedade de configurações físicas e operacionais. O simulador foi calibrado com dados de Curitiba e Porto Alegre e foi empregado para testar e aprimorar os projetos dos corredores TransCarioca, no Rio de Janeiro e de Arequipa, no Peru. No caso do TransCarioca, o estudo demonstrou que, com pequenos ajustes no projeto, é possível aumentar a capacidade de 20 para 30 mil passageiros/h/sentido atendendo assim a demanda prevista para os Jogos Olímpicos de 2016. Em Arequipa, a simulação revelou a necessidade de antecipar a introdução de uma linha adicional de forma a aliviar a saturação no centro histórico da cidade que é patrimônio da humanidade.
Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network
A model to compare three alternative forms of public transport – light rail, heavy rail and bus rapid transit – is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (networkdensity) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A railmode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.
Restating modal investment priority with an improved model for public transport analysis
We compare analytically and numerically the optimised performance of different urban public transport modes for three objectives: total cost minimisation, profit maximisation, and welfare maximisation. We find that under optimal operation, buses provide lower waiting time and operator costs, therefore the only possible advantage for rail is providing a lower in-vehicle time cost if trains are faster. Using Australian data, we found that bus rapid transit provides a lower total cost, higher profit and welfare, up to their capacity. Introducing passengers dislike of crowding and train-specific attraction elements might make Heavy Rail the most cost effective mode for high levels of demand.
Sustainable public transport systems: moving towards a value for money and network-based approach and away from blind commitment
Growing public transport patronage in the presence of a strong demand for car ownership and use remains a high agenda challenge for many developed and developing economies. While some countries are losing public transport modal share, other nations are gearing up for a loss, as the wealth profile makes the car a more affordable means of transport as well as conferring elements of status and imagery of “success”. Some countries however have begun successfully to reverse the decline in market share, primarily through infrastructure-based investment in bus systems, commonly referred to as bus rapid transit (BRT). BRT gives affordable public transport greater visibility and independence from other modes of transport, enabling it to deliver levels of service that compete sufficiently well with the car to attract and retain a market segmented clientele. BRT is growing in popularity throughout the world, notably in Asia, Europe and South America, in contrast to other forms of mass transit (such as light and heavy rail). This is in large measure due to its value for money, service capacity, affordability, relative flexibility, and network coverage. This paper takes stock of its performance and success as an attractive system supporting the ideals of sustainable transport
Bus rapid transit systems – comparative assessment
There is renewed interest in many developing and developed countries in finding ways of providing efficient and effective public transport that does not come with a high price tag. An increasing number of nations are asking the question—what type of public transport system can deliver value for money? Although light rail has often been promoted as a popular ‘solution’, there has been progressively emerging an attractive alternative in the form of bus rapid transit (BRT). BRT is a system operating on its own right-of-way either as a full BRT with high quality interchanges, integrated smart card fare payment and efficient throughput of passengers alighting and boarding at bus stations; or as a system with some amount of dedicated right-of-way (light BRT) and lesser integration of service and fares. The notion that buses essentially operate in a constrained service environment under a mixed traffic regime and that trains have privileged dedicated right-of-way, is no longer the only sustainable and valid proposition. This paper evaluates the status of 44 BRT systems in operation throughout the world as a way of identifying the capability of moving substantial numbers of passengers, using infrastructure whose costs overall and per kilometre are extremely attractive. When ongoing lifecycle costs (operations and maintenance) are taken into account, the costs of providing high capacity integrated BRT systems are an attractive option in many contexts.
Alternative financing for Bus Rapid Transit (BRT): The case of Porto Alegre, Brazil
In the 1970s, Brazil was leading the implementation of high-flow bus priority schemes, but now cities are less capable of financing public infrastructures. This paper explores the private sector participation in the provision of transit infrastructure based on Public–Private Partnerships (PPP) for Bus Rapid Transit (BRT). The Porto Alegre BRT contemplates interchange terminals planned to accommodate retail and service activities. It is expected that these areas shall generate enough revenues to remunerate private investors, under a PPP scheme, for the construction of terminals and part of the infrastructure required to upgrade some sections of the existing busways to BRT standards.